Global Site

For communication
The "wall"Do not need!

I am a fisherman

Information for corporate customers

Bulk orders/servicesSupport information/For any other questions,Please contact us from the following.

Contact


Photocatalytic sterilization and deodorization machine / Kaltec
KL-T01

Clean air partition
ご使用に関して
  • This product is not primarily designed to eliminate odors from the entire space.
  • We have not tested it for all viruses, bacteria, and odors.
  • It does not completely block droplets from sneezes, etc.
  • Each cable is 60cm long. Please purchase the number of sets required based on your table size.
    Please note that installation may not be possible depending on the table size and structure.

Replaces acrylic sheetsAerosol countermeasures ※ 1 · 2Clean airPartition

There are two basic parts ※ 3simple design

Easy to removeEasy to clean

  • Not tested for all viruses, bacteria, and odors.
  • It does not completely block droplets from sneezes, etc.
  • Each cable is 60cm long. Please purchase the number of sets required based on your table size. Please note that installation may not be possible depending on the table size and structure.

VariousIn the scene
活躍します。

T01 image
T01 image
T01 image
T01 image
T01 image

Clean airPartition
With photocatalytic sterilization and deodorization function

[Table Air]

Table Air

Aerosol countermeasures instead of acrylic panels "Clean air partition"

T01 image

Like an air circulator, it sucks in dirty air and creates a partition of clean air using photocatalysts. It prevents aerosols (microdroplets) contained in exhaled breath from reaching the person opposite. Aerosols dispersed by the table air are carried by the air currents at the top of the room and ventilated to windows, ventilation fans, etc. Acrylic panels help relieve everyday stress, such as "pretending to hear because you can't" and "it's difficult to hand over something."

  • Not tested for all viruses, bacteria, and odors.
  • It does not completely block droplets from sneezes, etc.
Droplet prevention measures as an alternative to acrylic panels
Clean air partition
<Demonstration experiment video>

This time, using the air visualization technology developed by RIKEN,(Human breath)The visualization of aerosol particles in the air was demonstrated. By using a special system with a special high-sensitivity camera to capture images of cigarette smoke following exhalation, the movement of aerosol particles, which are roughly the same size as cigarette particles, through space was confirmed. The aerosol particles contained in exhaled breath are dispersed toward the ceiling by the airflow generated by this product.

In various placesClean airPartitions are in action!

(An example)
Senbo Sennichimae Main Store
Sports Club NAS Nakamozu
Takahashi Hospital
Click here for details

There are two basic parts

Simple design and easy installation!

COLOR: blackBrownwhite

The main parts are the photocatalytic sterilization and deodorization device and two types of cable, each 60cm long. You can connect or cut it to fit the size and structure of your table.(Mounting accessories are included)

  • Please purchase the number of sets required based on the size of your table. Installation may not be possible depending on the size and structure of your table.

Various parts

  • The basic M set includes two moldings and one photocatalytic sterilization and deodorization device (various parts included).
T01 image

COLOR: blackBrownwhite

T01 image

Under desk installation

T01 image

Tabletop installation 1

T01 image

Tabletop installation 2

Easy to clean

No filter replacement required

No filter replacement is required, making it economical and waste-free. Simply soak in water and dry in the sun.
It's always easy to clean.

Photocatalytic filter cleaning method

  • Soak in at least 1 liter of water for approximately 10 hours before washing.
  • Let it dry naturally in the sun until all the moisture is gone.
  • If used 8 to 10 hours a day, the power light will turn orange in about 3 months.

Cleaning the main body/suction port

  • Clean the intake port regularly with a soft cloth.
  • To remove dirt from the main unit, wipe it with a soft, dry cloth.
  • Do not use water, detergents, chemical cloths, etc.

Cleaning the pre-filter (intake port)

  • Remove the pre-filter from the intake port on the back of the unit.
    Hold down the removal tab and remove it in the direction of the arrow.
  • Remove dust
    Wash the pre-filter with water or wipe it gently with a soft cloth.
    • Do not rub the surface too hard.
  • When vacuuming, do not press too hard with the vacuum cleaner's suction port. Also, do not scrub with a brush.
  • Do not use chemical cloths.

Cleaning the mall/mall air outlet

  • To remove dirt from the main body of the air filter, wipe it with a soft cloth or wash it with water using a soft sponge. The air outlet of the air filter can be pulled out and separated, so the inside can also be wiped clean.
    • Please use diluted neutral detergent.
  • It can also be removed from the main body and washed with water. In this case, please pull out the outlet of the molding.
  • Do not use chemical cloths.
  • When wiping the surface of the molding outlet, do not press too hard as it may come off the molding.

Kartec's photocatalytic technology

An overwhelming experience like never before
In performance
Deodorizing and disinfecting.

With Kartec's unique "photocatalytic technology"
It breaks down odor components, harmful substances, bacteria, etc. in the air,
It purifies the air into clean air.

  • We have not tested it for all viruses, bacteria, and odors.
Kartec's photocatalytic technology
Product name Table Air
Clean air partition with photocatalytic sterilization and deodorization functions
Model numberKL-T01 [For corporations]
Suggested retail priceOpen price
Deodorizing and deodorizing methodActivated carbon photocatalytic filter
External dimensions(mm) Body: Width 195.5 x Depth 115 x Height 45(excluding protrusions)
Mall: length 600 x width 40 x height 30(per bottle)
weight(kg) [Main body] Approx. 0.4
[Mall] Approx. 0.3 (per bottle)
Air flow(m3/min)Approximately 0.1~0.3
AC adapterInput: AC100V 50/60Hz Output: DC12V
Main unit: Input voltage: DC12V
Operating Temp. Range(℃)0 ~ 40
Power(W)8.0
standby power(W)0.3
AccessoriesActivated carbon photocatalytic filter: 1 piece(Already installed)
AC adapter(1.8m):1 piece
Instruction manual: 1 piece Installation guide: 1 copy Caution sheet: 1 sheet
<Mall section>
Mole: 2  U-shaped pipe: 1 piece
Connection pipe: 1 piece Air outlet joint: 1 piece
ジョイント:2個  End cap: 1 piece
The wolf pack
  • The number varies depending on the set.
ご使用に関して
  • This product is not primarily designed to eliminate odors from the entire space.
  • We have not tested it for all viruses, bacteria, and odors.
  • It does not completely block droplets from sneezes, etc.
  • Each cable is 60cm long. Please purchase the number of sets required based on your table size.
    Please note that installation may not be possible depending on the table size and structure.